Health Monitoring of Induction Motor through Vibration Analysis

Mayuri Sonowal, Bedanta B. Gogoi, Mrinmoy Boruah, Jyoti Kumar Barman

Abstract


Machinery monitoring is the process of monitoring a parameter of condition in machinery, such that a significant change is indicative of a failure in development. Temperature, vibration, noise, current, voltage, acoustic emission, etc. – all these measurements are used for machine condition monitoring. Measuring vibration signals of the Non-Destructive Testing (NDT) method is widely used to detect machine faults. There are many studies for the prediction of mechanical wear, fault and failure in this area for several decades. Signal processing techniques are used to obtain vital characteristic information from the vibration signals. This paper attempts to summarize the results of an evaluation of vibration analysis techniques as a method for diagnosis for three-phase induction motors.

Keywords


Vibration signals; Induction motor; Vibration analysis; Condition Based Maintenance (CBM); Frequency-Domain analysis; Time-Domain analysis

Full Text:

PDF

References


Vishnu Kv, Anoop Bk, Adarsh Ks, “Vibration Analysis: A Literature Review”, IOSR Journal of Electronics and Communication Engineering (IOSR-JECE), Vol. 10, Issue 5, Ver. II, 2015, pp. 35-39. Retrieved from http://www.iosrjournals.org/iosr-jece/papers/Vol.%2010%20Issue%205/Version-2/G010523539.pdf

D. H. Shreve, “Signal Processing For Effective Vibration Analysis”, IRD Mechanalysis, Inc, Columbus, Ohio, November 1995, pp. 1-11. Retrieved from http://www.irdbalancing.com/assets/signalprocessingforeffectivevibrationanalysis.pdf

D. H. Shreve, “Signal Processing For Effective Vibration Analysis”, IRD Mechanalysis, Inc, Columbus, Ohio, November 1995, pp. 1-11. Retrieved from http://www.irdbalancing.com/assets/signalprocessingforeffectivevibrationanalysis.pdf

G. B. Kliman and J. Stein, “Methods of Motor Current Signature Analysis”, Electric Machines & Power Systems, Vol. 20, Issue 5, Sept. 1992, pp. 463–474. Doi: https://doi.org/10.1080/07313569208909609

I. Yesilyurt, Gearbox fault detection and severity assessment using vibration analysis, PhD Thesis, University of Manchester, School of Engineering, USA, 1997.

R. Li and D. He, “Rotational Machine Health Monitoring and Fault Detection Using EMD-Based Acoustic Emission Feature Quantification”, IEEE Transactions on Instrumentation and Measurement, Vol. 61, Issue 4, April 2012, pp. 990-1001. Doi: 10.1109/TIM.2011.2179819

A. Aherwar and S. Khalid, “Vibration analysis techniques for gearbox diagnostics: A Review”, International Journal of Advanced Engineering Technology (IJAET), Vol. III, Issue II, April-June, 2012, pp. 4-12. Retrieved from https://www.researchgate.net/publication/302931893

M. Lebold, K. McClintic, R. Campbell, C. Byington and K. Maynard, “Review of Vibration Analysis Methods for Gearbox Diagnostics and Prognostics”, Proc. of the 54th Meeting of the Society for Machinery Failure Prevention Technology, Virginia Beach, VA, May 1-4, 2000, pp. 623-634 Retrieved from https://www.researchgate.net/publication/267822399

T. D. Graybeal, “The Nature of Vibration in Electric Machinery”, Transactions of the American Institute of Electrical Engineers, Vol. 63, Issue 10, Oct. 1944, pp. 712-718. Doi: 10.1109/T-AIEE.1944.5058779

M. Rahman, T. Azam and S. K. Saha, “Motor fault detection using vibration patterns”, Proc. of International Conference on Electrical & Computer Engineering (ICECE 2010), Dhaka, 18-20 Dec. 2010, pp. 486-489. Doi: 10.1109/ICELCE.2010.5700735

W. W. Li, Experimental Investigations on Vibrations and Acoustic Noise of an Induction Motor, MS Thesis, College of Graduate Studies and Research, Department of Electrical Engineering, University of Saskatchewan Saskatoon, Canada, August 2001. Retrieved from https://pdfs.semanticscholar.org/ad8b/a4255c28c8add5479c5607975a1db2d66f4c.pdf

K. C. D. Kompella, V. G. R. Mannam and S. R. Rayapudi, “Bearing fault detection in a 3 phase induction motor using stator current frequency spectral subtraction with various wavelet decomposition techniques”, Ain Shams Engineering Journal, Vol. 9, Issue 4, December 2018, pp. 2427-2439. Doi: https://doi.org/10.1016/j.asej.2017.06.002

I. Asilturk, H. Aslanci and U. Ozmen, “Machinery Monitoring using Vibration Signal Analysis”, International Journal of Mechanical And Production Engineering, Vol. 5, Issue 2, Feb. 2017, pp. 21-25. Retrieved from http://www.iraj.in/journal/journal_file/journal_pdf/2-347-149260145721-25.pdf




Copyright (c) 2019 Author

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.


Call for Paper for the upcoming issue
 
The journal welcomes publications of high-quality research papers, review papers, white papers, conference papers, etc. on theoretical developments and practical applications in the domain of Electrical and Electronics and its allied sciences.
 
Authors are solicited to contribute to the journal by submitting articles that illustrate original research works, short communications and review articles in the thrust areas of the journal as mentioned on the About page.
 
Submission and AJEEE Paper Template:
  • Download the AJEEE paper template and submit your paper at the PAPER SUBMISSION page.
 
ADBU Journal of Electrical and Electronics Engineering (AJEEE) - ISSN: 2582-0257 is an International peer-reviewed Open-Access Online journal in the English language that publishes scientific articles which contribute new novel experimentation and theoretical work in all areas of Electrical and Electronics Engineering and its applications.

* The views, interpretations and opinions expressed in the articles are those of the author(s) and should not be considered to reflect the opinions of the Editorial Board of this journal- AJEEE.

Creative Commons License