Advanced Control Methods of Induction Motor: A Review
In this paper, various types of advanced control methods of the induction motor are discussed, and a comparision between these methods have been brought out. This paper also discusses about the application areas of these new methods. The objective of this review is to conclude which method is the best control scheme among all of these methods. The related block diagrams for various control schemes are also illustrated along with various steps involved in the implementation of those schemes. Advantages and disadvantages of the schemes are also presented.
F. Rashidi, “Sensorless Speed Control of Induction Motor Derives using Robust and Adaptive Neuro-Fuzzy Based Intelligent Controller”, Proc. of 2004 IEEE International Conference on Industrial Technology (IEEE ICIT '04), Vol. 2, Hammamet, Tunisia, 8-10 Dec 2004, pp. 617-627. Doi: 10.1109/ICIT.2004.1490145
M. Benhaddadi, K. Yazid and R. Khaldi, “An effective identification of rotor resistance for induction motor vector control”, IEEE Instrumentation and Measurement Technology Conference Sensing, Processing, Networking- IMTC Proceedings, Vol. 1, Ottawa, Ontario, Canada, 19-21 May 1997, pp. 339-342. Doi: 10.1109/IMTC.1997.603968
M. Osama and T. A. Lipo, “Modeling and analysis of a wide-speed-range induction motor drive based on electronic pole changing” IEEE Transactions on Industry Applications, Vol. 33, Issue 5, Sept.-Oct. 1997, pp. 1177-1184. Doi: 10.1109/28.633794
J. H. Song, K. B. Kim and M. J. Youn, “Control of stator voltage-controlled current source induction motor drive”, Proc. of the IEEE International Symposium on Industrial Electronics, Vol. 2, Xian, China, 25-29 May 1992, pp. 653-657. Doi: 10.1109/ISIE.1992.279683
A. Z. Latt and N. N. Win, “Variable Speed Drive of Single Phase Induction Motor Using Frequency Control Method”, 2009 IEEE International Conference on Education Technology and Computer, Singapore, 17-20 April, 2009, pp. 30-34. Doi: 10.1109/ICETC.2009.72
T. Jamadar and V. Rajderkar, “V/F Control Technique for Three Phase Induction Motor Drive using DSP TMS320F2812”, International Research Journal of Engineering and Technology (IRJET), Vol. 3, Issue 3, Mar 2016, pp. 417-420. Retrieved from https://www.irjet.net/archives/V3/i3/IRJET-V3I386.pdf
P. K. Behera, M. K. Behera and A. K. Sahoo, “Speed Control of Induction Motor using Scalar Control Technique”, Proc. of IJCA Proceedings on International Conference on Emergent Trends in Computing and Communication (ETCC 2014), September 2014, pp. 37-39. Retrieved from https://research.ijcaonline.org/etcc/number1/etcc1411.pdf
G. Kohlrusz and D. Fodor, “Comparision of scalar control strategies of induction motor”, Hungarian Journal of Industrial Chemistry, Vol. 39, Issue 2, 2011, pp. 265-270. Retrieved from http://mk.uni-pannon.hu/hjic/index.php/hjic/article/view/422/390
M. Jannati, T. Sutikno, N. R. N. Idris and M. J. A. Aziz, “A Novel Method for Rotor Field-Oriented Control of Single Phase Induction Motor”, International Journal of Electrical and Computer Engineering (IJECE), Vol. 5, No. 2, April 2015, pp. 205-212.
M. B. de Rossiter Correa, C. B. Jacobina, E. R. C. da Silva and A. M. N. Lima, “Vector control strategies for single-phase induction motor drive systems”, IEEE Transactions on Industrial Electronics, Vol. 51, Issue 5, Oct. 2004, pp. 1073-1080. Doi: 10.1109/TIE.2004.834973
M. Jemli, H. B. Azza, M. Boussak and M. Gossa, “Sensorless Indirect Stator Field Orientation Speed Control for Single-Phase Induction Motor Drive”, IEEE Transactions on Power Electronics, Vol. 24, Issue 6, pp. 1618-1627, June 2009. Doi: 10.1109/TPEL.2009.2014867
M. B. de Rossiter Correa, C. B. Jacobina, A. M. N. Lima and E. R. C. da Silva, “Rotor-flux-oriented control of a single-phase induction motor drive”, IEEE Transactions on Industrial Electronics, Vol. 47, Issue 4, Aug. 2000, pp. 832-841. Doi: 10.1109/41.857963
M. Jannati, S. H. Asgari, N. R. N. Idris and M. J. A. Aziz, “Speed sensorless direct rotor field-oriented control of single-phase induction motor using extended kalman filter”, International Journal of Power Electronics and Drive Systems (IJPEDS), Vol. 4, Issue 4, 2014, pp. 430-438.
A. M. Gajare and N. R. Bhasme, “A Review on Speed Control Techniques of Single Phase Induction Motor”, International Journal of Computer Technology and Electronics Engineering (IJCTEE), Vol. 2, Issue 5, October 2012, pp. 32-39.
V. S. Fating, S. V. Jadhav, R. T. Ugale and B. N. Chaudhari, “Direct Torque Control of Symmetrical and Asymmetrical Single Phase Induction Motor”, Proc. of 2008 Joint International Conference on Power System Technology and IEEE Power India Conference, New Delhi, 12-15 Oct. 2008, pp. 1-4. Doi: 10.1109/ICPST.2008.4745327
F. A. S. Neves, E. B. S. Filho, J. M. S. Cruz, R. P. Landim, Z. D. Lins and A. G. H. Accioly, “Single-phase induction motor drives with direct torque control”, Proc. of IEEE 2002 28th Annual Conference of the Industrial Electronics Society (IECON 02), Vol. 1, Sevilla, 5-8 Nov. 2002, pp. 241-246. Doi: 10.1109/IECON.2002.1187514
M. L. Mhaisgawali and S. P. Muley, “Induction Motor Speed Control using PID Controller”, International Journal of Technology and Engineering Science, Vol. 1, Issue 2, 2013, pp. 151-155.
B. H. Pundaleek, M. G. Rathi, M. G. V. Kumar, “Speed Control of Induction Motor: Fuzzy Logic Controller v/s PI Controller”, International Journal of Computer Science and Network Security (IJCSNS), Vol. 10, Issue 10, October 2010, pp. 223-230. Retrieved from https://www.scribd.com/document/58287344/Speed-Control-of-Induction-Motor-Fuzzy-Logic-Controller-Dengan-PI
B. Messner, D. Tilbury, R. Hill and J. D. Taylor “Introduction: PID Controller Design”, Control Tutorials for MATLAB and Simulink (CTMS). [Online]. Available: http://ctms.engin.umich.edu/CTMS/index.php?example=Introduction§ion=ControlPID (Accessed: 12 April 2017)
M. M. M. Negm, "Torque optimized speed control of a 3-phase induction motor”, Proc. of 2000 International Conference on Power System Technology, PowerCon 2000 (Cat. No.00EX409), Vol. 1, Perth, WA, Australia, 4-7 Dec. 2000, pp. 67-72. Doi: 10.1109/ICPST.2000.900033
D. Mulik, G. S. Phadke and S. Salunkhe, “Sliding Mode Speed Controller for Vector Controlled Induction Motor”, International Research Journal of Engineering and Technology (IRJET), Vol. 2, Issue 7, Oct. 2015, pp. 101-105. Retrieved from https://pdfs.semanticscholar.org/900e/a6d65b0d6859a51430a1ac8d997d5da28e1a.pdf
V. Utkin, J. Guldner and J. Shi, Sliding Mode Control in Electro-Mechanical System, Second Edition, CRC Press, NW, 2009.
V. I. Utkin, “Sliding mode control design principles and applications to electric drives”, IEEE Transactions on Industrial Electronics, Vol. 40, Issue 1, Feb. 1993, pp. 23-36. Doi: 10.1109/41.184818
P. K. Behera, M. K. Behera and A. K. Sahoo, “Comparative Analysis of Scalar & Vector control of Induction motor through Modeling & Simulation”, International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering, Vol. 2, Issue 4, April 2014, pp. 1340-1344.
F. Eldali, A Comparative Study between Vector Control and Direct Torque Control of Induction Motor using MATLAB SIMULINK, M.S. Thesis, Colorado State University, Fort Collins, Colorado, 2012. Retrieved from https://www.researchgate.net/publication/283016185
D. Mulik, G. S. Phadke and S. Salunkhe, “Sliding Mode Speed Controller for Vector Controlled Induction Motor”, International Research Journal of Engineering and Technology (IRJET), Vol. 2, Issue 7, Oct. 2015, pp. 101-105.
M. Guarnieri, “The Beginning of Electric Energy Transmission: Part Two [Historical]”, IEEE Industrial Electronics Magazine, Vol. 7, Issue 2, June 2013, pp. 52-59. Doi: 10.1109/MIE.2013.2256297
- There are currently no refbacks.
Copyright (c) 2019 Author and Journal (AJEEE)
Call for Paper for the upcoming issue
The journal welcomes publications of high-quality research papers, review papers, white papers, conference papers, etc. on theoretical developments and practical applications in the domain of Electrical and Electronics and its allied sciences.
Authors are solicited to contribute to the journal by submitting articles that illustrate original research works, short communications and review articles in the thrust areas of the journal as mentioned in theÂ AboutÂ page.
- The downloadable Template and the Online submission link are available on theÂ PAPER SUBMISSIONÂ page
ADBU Journal of Electrical and Electronics Engineering (AJEEE) - ISSN: 2582-0257 is an International peer-reviewed Open-Access Online journal in English language that publishes scientific articles which contribute new novel experimentation and theoretical work in all areas of Electrical and Electronics Engineering and its applications.
* The views, interpretations and opinions expressed in the articles are those of the author(s) and should not be considered to reflect opinions of the Editorial Board ofÂ this journal- AJEEE.
This Journal is published under theÂ Creative Commons Attribution 4.0 International License (CC-BY).