Design of RTU & SCADA

Abhijit Talukdar, Kailash Laishram, Kime Tayu, Jyoti Kumar Barman, Gitu Das

Abstract


Abstract:

This work aims at designing a system with which the various parameters viz. Frequency(Hz), Bus-bar Current(kA),Bus-bar Voltage(kV), Reactive Power(MVAR),ActivePower(MW) and equipments like Isolator ,Relay ,Circuit Breaker of Sub-Station or
Generating Station can be monitored and controlled from a remote location . To achieve the desired output Remote Terminal Unit(RTU) will be placed in the Sub-Station or Generation Station which will acquire the various data and these data will be transmitted to the SCADA(Supervisory Control and Data Acquisition) station of RLDC (Regional Load Despatch Centre) . In this work, Arduino integrated with Step Down Voltage Transformer , ACS712 Hall Effect Current Sensor and SPDT Relay is configured as RTU and a PC loaded with a GUI is configured as SCADA(Supervisory Control and Data Acquisition).

Keywords: RTU,SCADA,Arduino,PC,GUI,ACS712 Hall Effect Current Sensor, RLDC.


(Article history: Received 29 April 2016 and accepted 30 December 2016)


Full Text:

PDF

Refbacks

  • There are currently no refbacks.


------------------------------------------------------------------------------------------------------------------------

The ADBU Journal of Engineering Technology (AJET)" ISSN:2348-7305

This journal is published under the terms of the Creative Commons Attribution (CC-BY) (http://creativecommons.org/licenses/)

Number of Visitors to this Journal: